v2rayN Subscription Groups and Server Filters: Managing Multiple Providers

Organize multiple v2rayN subscriptions into named groups, filter servers by keyword, and set refresh intervals to keep provider lists manageable.

At a glance

For anyone managing two or more subscriptions in the desktop version of v2rayN. Create groups by provider, narrow down the server list with keywords, then set a refresh interval for each group. If the list is empty, check whether display filtering, import filtering, or a failed subscription update is the cause before changing settings.

Import Multiple Subscriptions into v2rayN: One URL per Group

A subscription URL retrieves a list of configurations; each server is one connection configuration in that list, and a group identifies where those configurations came from. Put each subscription in its own group so you can troubleshoot update failures or renamed servers by provider instead of identifying them one by one in the full server list. The steps below use the Chinese-language interface in v2rayN 7.x for Windows. Menu placement may vary between minor versions; the same actions may also be available from the toolbar above the group list.

  1. Open Group Settings

    In the main window, go to “Subscription Group” → “Subscription Group Settings,” then click “Add” or the plus button to create a group. Do not use the single-server import option under the “Servers” menu to add a subscription.

  2. Enter an Alias and URL

    For “Alias,” enter “Provider A - Primary.” Paste the complete subscription URL from that provider into the URL field, then save. For the first import, leave the filters in the subscription editor blank so you can see the original server names.

  3. Update the Group Separately

    Return to the main window, select the new group, then go to “Subscription Group” → “Update Current Subscription (No Proxy).” Check the update result, then see whether servers appear in the group. Saving a subscription URL and fetching its server list are separate steps; an empty list immediately after creating a group does not mean the URL is invalid.

  4. Check the Second Subscription

    Repeat the steps for “Provider B - Backup,” then select that group and update the current subscription. Note the server count and a few representative remarks in each group for comparison when filtering and troubleshooting updates later. Once both groups are confirmed to work, update all subscriptions as needed.

Subscription URLs may contain account tokens. Use only a provider abbreviation and role in group aliases. Redact subscription URLs and their parameters from screenshots, logs, and support requests.

Name Subscription Groups by Provider and Purpose

A group name should make it clear which provider to contact about that list. A group usually contains servers in multiple regions and may include different protocols, so names like “Hong Kong” or “VLESS” alone are not a good fit. Region and protocol help you choose a server; provider names help you troubleshoot a subscription. They do not need to be combined in one group name.

Provider Abbreviation + Role

Recommended

For example, “Provider A - Primary” and “Provider B - Backup.” If you switch the backup group to primary, just change its alias. Keep the provider abbreviation unchanged so update history and support requests still point to the same subscription.

Best for: managing primary and backup subscriptions from different providers

Provider Abbreviation + Plan Type

For example, “Provider A - Standard” and “Provider A - Low Multiplier.” Use separate groups only if the provider supplies two distinct subscription URLs. If one URL includes both types of server, keep one group and use remark filters to distinguish them.

Best for: providers that supply multiple separate subscription URLs

Do not duplicate the same subscription URL just to create groups for different purposes. If you save the same URL twice, each group maintains and fetches its own list, and you will have to update both if the URL changes. Server remarks are also a poor choice for long-term provider labels: when the provider changes its naming, the local list may change on the next refresh.

Filter Servers by Remark Keywords

Select a subscription group first, then use the filter box above the server list in the main window. This filters what is displayed; it does not delete servers, change subscription URLs, or add routing rules. Filtering a server also does not make it the active server. To switch servers, select the one you want, choose “Set as active server” from the right-click menu, then confirm the active server shown by the client.

  1. Check the naming first. Clear the filter and look at the remarks on the first few servers in the group. If they say “Hong Kong 01” and “Hong Kong 02,” try “Hong Kong” rather than assuming another provider uses the familiar HK abbreviation.
  2. Test one keyword at a time. To find low-multiplier servers, check whether the remarks use 0.5x, 0.5×, or “half multiplier.” These formats are not interchangeable. Refer to the provider’s documentation for multiplier values and eligibility; do not rely on server names alone.
  3. Clear the filter before switching groups. To compare the same region across providers, clear the old filter, select the new group, then search using that group’s naming conventions. This prevents an abbreviation from the previous provider from making it look as if the new group has no servers in that region.

The main window’s server-list filter is different from the regex filter in the subscription editor. The latter determines which servers are imported when the subscription is refreshed. Clearing the main window’s search does not show entries excluded by the import filter. For temporarily finding servers, use the list filter. If you have set an import filter and the list looks wrong, record the existing filter, clear it, and manually update the current group. Then compare the number of entries before and after.

Set a Subscription Refresh Interval in Minutes

Go to “Subscription Group” → “Subscription Group Settings,” select the group to change, and edit it. In versions with an “Auto Update Interval” field, confirm that the unit is minutes and check whether “Enable Update” is enabled for that group. The examples below are for converting intervals, not client defaults. Follow the provider’s limits if it specifies a refresh frequency.

720 minutes
12 hours: example for a frequently changing subscription
1,440 minutes
24 hours: example for a primary subscription
10,080 minutes
7 days: example for an infrequently updated backup subscription
  • Make sure manual updates work first. If you change a subscription URL, renew your plan, or hear that the provider has moved servers, select the relevant group and update it manually. There is no need to wait for the next automatic refresh.
  • Set the interval based on how often things change. If your primary group is stable, there is no need to shorten the refresh interval just because a server is slow to connect. Updating a subscription fetches configurations; it does not test server speeds or switch servers automatically.
  • Remember to check backup groups. Automatic updates require the client to be running. If the desktop app is not always open, check backup groups manually from time to time and confirm that at least one server works before you need it.

Common Questions About Subscription Updates and Filters

The update succeeded, but no servers are showing. Why?

First, clear the main window’s filter and make sure you have selected the group you just updated. If the list is still empty, open that group’s subscription settings, note the regex filter, clear it temporarily, and update the current group again. If no entries appear, check the update log to tell whether the request succeeded but no servers could be parsed, or whether the request itself failed.

Only one subscription timed out. Do I need to update them all?

No. Select the group that failed, run “Update Current Subscription (No Proxy),” and check the log. If direct requests keep timing out and another group has a working server, set that server as active, then return to the failed group and choose “Update Current Subscription (Proxy).” If the log says the URL is invalid or the server denied access, check the subscription URL and account status first.

Why did my manually edited server remarks revert?

A subscription update may rebuild the group entries using configurations returned by the server. Put persistent labels in the group alias instead of renaming individual servers. If you simply want to hide some entries, use the display filter. Servers you delete individually may reappear on the next update if the provider still includes them.

Both groups have a “Hong Kong 01.” Are these duplicate servers?

You cannot tell from the remark alone. Switch to each group and check the protocol, server address, port, and transport settings in the server editor. Even if these fields match, the authentication settings may differ. Keep the provider groups separate so you can update them independently, and do not share authentication details when asking for help.

Download v2rayN